SIL-ACT® WATER REPELLANTS


SIL-ACT® water repellents are penetrating isobutyltrimethoxy silane treatments that permanently weatherproof concrete and masonry from water and salt intrusion without forming a surface coating. SIL-ACT® provides:

  • Permanent chemical bond
  • Deep penetration/forms a penetrated protection layer
  • No appearance or surface change – does not yellow
  • Does not affect skid resistance
  • Easy to use, reduces masking, overspray and cleanup problems
  • Vapor permeable
  • Stops water, salt and waterborne contaminant intrusion
  • Stops efflorescence, freeze thaw damage and spalling
  • Resists acid rain damage and waterborne staining
  • Cost effective
  • Improves adhesion of solvent based paint/striping
  • Not susceptible to ultraviolet or chemical degradation
  • Effective on brick and many types of natural stone
SIL-ACT® ATS-200

SIL-ACT® ATS-200 is a clear, penetrating silane treatment which causes concrete, masonry and many natural stones to become repellent to water, chloride, waterborne contaminants and weathering elements, preventing the premature deterioration of parking decks, bridge decks, pavements and other types of concrete and masonry structures. Performance testing makes SIL-ACT® ATS-200 an excellent choice for any project requiring the highest quality clear water repellent.

SIL-ACT® ATS-100 LV

SIL-ACT® ATS-100 LV  is a clear, penetrating silane treatment which causes concrete, masonry and many natural stones to become repellent to water, chloride and other waterborne contaminants and weathering elements, preventing the premature deterioration of parking decks, bridge decks, pavements and other types of concrete and masonry structures. Performance testing makes SIL-ACT® ATS-100 LV an excellent choice for any project requiring the highest quality clear water repellent.

SIL-ACT® ATS-100

SIL-ACT® ATS-100 is a premium grade, clear, penetrating silane-waterproofing treatment. It complies with EPA and most state’s VOC regulations. ATS-100 is formulated to provide maximum square foot coverage per gallon (between 200 to 300 square feet per gallon depending on substrate). ATS-100 is an excellent solution for high traffic areas such as bridge decks, highways, parking garages and any structure requiring the highest quality water repellent.

SIL-ACT® ATS-190 LV

SIL-ACT® ATS-190 LV is a clear, penetrating silane treatment which causes concrete, masonry and natural stone structures to become repellent to water, chloride, ions and waterborne contaminants, preventing their premature deterioration.  SIL-ACT® ATS190 LV forms a chemical bond which will last until the penetrated depth is abraded away. While the surface of the substrate is water repellent, it remains permeable, allowing harmful water vapor in the substrate to escape. This is the difference between SIL-ACT® and film forming water proofing products.

SIL-ACT® ATS-44A

SIL-ACT® ATS-44A is a clear, Low VOC, penetrating silane treatment which can be applied to the surface by low-pressure spray, brush, roller or squeegee. SIL-ACT® ATS-44A chemically bonds with the substrate forming a penetrated layer below the surface that acts as a one way filter. Water, chloride and other waterborne contaminants are repelled without restricting the substrates natural vapor permeability.

SIL-ACT® ATS-42

SIL-ACT® ATS-42 is the standard of the industry, ATS-42 is a high grade, clear, penetrating silane waterproofing treatment. It is compliant with EPA VOC regulations. ATS-42 is an excellent choice for high abrasion areas such as bridge decks and parking garages, but is an effective treatment for almost any concrete, masonry, or natural stone structure.

SIL-ACT® ATS-42NS

SIL-ACT® ATS-42NS is a clear, penetrating silane treatment which causes concrete, masonry and many natural stones to become repellent to water, chloride, waterborne contaminants and weathering elements, preventing the premature deterioration of parking decks, bridge decks, pavements and other types of concrete and masonry structures. Performance testing makes SIL-ACT® ATS-42NS an excellent choice for any project requiring the highest quality clear water repellent.

SIL-ACT® ATS-42A

SIL-ACT® ATS-42A is a clear, Low VOC, penetrating silane treatment which can be applied to the surface by low-pressure spray, brush, roller or squeegee. SIL-ACT® ATS-42A chemically bonds with the substrate forming a penetrated layer below the surface that acts as a one way filter. Water, chloride and other waterborne contaminants are repelled without restricting the substrates natural vapor permeability.

SIL-ACT® ATS-42L

SIL-ACT® ATS-42L is a clear penetrating silane with ethylsilicate treatment specially formulated to treat limestone. The treatment causes limestone, concrete, masonry and many natural stones to become repellent to water, chloride and other waterborne contaminants and weathering elements, preventing the premature deterioration of structures and decorative features made from these materials. Performance testing makes SIL-ACT® ATS-42L an excellent choice when you require the highest quality clear water repellent.

SIL-ACT® ATS-22

SIL-ACT® ATS-22 complies with EPA VOC regulations while providing cost effective silane waterproofing treatment for concrete, masonry, and many natural stone structures. Recommended for medium abrasion areas such as vertical walls and moderately traveled horizontal structures such as parking garages.

SIL-ACT® ATS-22 VOC

SIL-ACT® ATS-22 VOC is a cost effective, clear, penetrating silane waterproofing treatment. ATS-22 VOC complies with EPA VOC regulations. It retains the benefits of solvent delivered silane while providing excellent penetration. Recommended for medium abrasion areas such as vertical walls and moderately traveled horizontal structures such as parking garages.

SIL-ACT® Multigard®

SIL-ACT® Multigard® is a 100% active silane concentrate with special additives to improve depth of penetration and weatherproofing reactivity. It contains no solvent carriers, is environmentally safe and VOC compliant. It is dispersed in water immediately prior to application and it provides high performance, durable and economical waterproofing protection for concrete, masonry and many natural stones. Some advantages of SIL-ACT® MULTIGARD® over emulsions are: clear dispersion, easy to apply, longer shelf life, no storage problems, quick absorption and reaction times, excellent water beading, and meets or exceeds solvent-based silane performance.

SIL-ACT® DRI-TRETE WB

SIL-ACT® DRI-TRETE WB is a penetrating silane/siloxane water based emulsion. Performance testing establishes SIL-ACT® DRI-TRETE as an excellent choice for projects requiring an emulsion application. Its siloxane component provides for larger attachment areas for more porous substrate, while the silane component provides the depth of penetration and reactivity needed for maximum waterproofing protection.

EPOXIES


SIL-ACT® EP-700 D

SIL-ACT® EP-700 D is a two component low viscosity epoxy polymer especially formulated to extend the life of concrete surfaces.  SIL-ACT® EP-700 D penetrates into concrete surfaces and into the smallest of cracks extending the life of both new and old concrete.  SIL-ACT® EP-700 D will form a protective barrier which will effectively protect surfaces from intrusion from water, salts, ions, and water borne contaminants, thus greatly extending the surface life of concrete protected with SIL-ACT® EP-700 D.

ACRYLICS


SIL-SHINE

SIL-SHINE is a low viscosity acrylic copolymer, sealing and dust proofing coating that protects and enhances the appearance of concrete with a clear, non-yellowing film that is more durable than standard polymer blend cure and seal products. SIL-SHINE is formulated in an exempt solvent carrier formulated for use in low VOC-regulated areas.

SIL-SHINE is designed to enhance the color of stamped concrete, exposed aggregate, and colored concrete pavers, making these surfaces look deeper and richer in appearance. Applied properly, SIL-SHINE will not turn white in the presence of moisture. SIL-SHINE gives concrete a satin finish that highlights the color and texture of surfaces.

EQUIPMENT


201C Hand Gun

The Model 201C Hand Gun allows quick and easy application of Multigard® to all vertical and horizontal concrete surfaces. No more mixing too much or too little chemical solution because the 201C Hand Gun dispenses directly from the backpack; mixing the Multigard® at the desired dilution rate. Dilution rates are controlled by color coded metering tips. It is the perfect sprayer for covering vertical areas and hard-to-reach places and it connects to any available water supply.

204C Spray Bar

The model 204C Spray Bar allows for quick and easy application of Multigard® to parking lots, garages and all types of concrete surfaces. No more mixing too much or too little chemical solution because the 204C Spray Bar dispenses directly from the Back Pack and precisely mixes the Multigard at desired dilution rate. Dilution rates are controlled by color coded metering tips.

Multigard® Backpack

The Multigard® Backpack is used with either the 201C Hand Gun or the 204C Spray Bar.  Multigard® siphons from the backpack through either of the application devices, while keeping Multigard® in a safe and dry environment.

Heavy Duty Spray Bar

The model 8081 Heavy Duty Spray Bar allows for QUICK and EASY application of Multigard® to parking lots, garages and all types of concrete surfaces. No more mixing too much or too little chemical solution because the Spray Bar dispenses directly from the original container. It precisely mixes Multigard® at the desired dilution rate. It is the perfect sprayer for covering large areas quickly and easily. The sprayer connects right to the water supply line. In addition to the spray boom, a hand held spray gun is attached to allow the operator to spray curbs or between obstructions.

Solvent Based Equipment


SIL-ACT® Professional Spraying System

The Model 8700 Sprayer Kit is designed to treat large areas quickly and accurately.  The sprayer consists of an air operated pump which draws the SIL-ACT® Silane Solution directly from the shipping container, a 6′ spray bar for covering large surfaces, and a spray gun to apply the fluid to curbs or vertical surfaces.  The spray bar and spray gun attach to the pump with quick disconnects for fast assembly.  It is all packed in a sturdy plastic case for easy storage and hauling.  To extend the life of your equipment it is recommended that the pump lines, spray bar and spray gun be flushed with SIL-ACT® Equipment Cleaner, after each use.

CLEANERS


SIL-ACT® Equipment Cleaner

Protect your equipment investment with our proven cleaner.  SIL-ACT® Equipment Cleaner is specially formulated to clean silane application equipment, including: pumps, hoses, spray attachments and associated other parts.  It is designed not to react with silane if a residual amount is left in the reservoir or hoses.  SIL-ACT® is 99.99% pure chemical compounds compared to other cleaners on the market that may contain as much as 30% water (water reacts with silane and causes gumming of equipment).  Keep your equipment in top working condition and extend its working life by using SIL-ACT® Equipment Cleaner.

Clean-ACT™ Bio-Clean

CLEAN-ACT™ BIO-CLEAN is the “green” way to meet today’s stringent and ecologically responsible concrete, masonry and many natural and architectural stone cleaning needs. CLEAN-ACT™ BIO-CLEAN is designed to safely remove the most stubborn stains caused by oils, greases, dirt, and chemical residues that are common in new and existing construction cleaning.  Rather than using harsh acids or alkali, CLEAN-ACT™ BIO-CLEAN is made from surfactants and non-hazardous ingredients specifically selected for their environmentally friendly characteristics.

Clean-ACT™ Duz-All

Clean-ACT™ Duz-All is a general purpose acidic cleaner for use on most standard concrete, colored concrete, precast panel and concrete block surfaces. Clean-ACT™ Duz-All is specially formulated to remove concrete splashes, excess mortar, retarders, heavy efflorescence, and embedded stains, rust and surface soiling.

Clean-ACT™ ASSR

Clean-ACT™ ASSR is a multi-functional product that addresses a number of surface preparation needs. It is a blend of hydrochloric acid, surfactants and corrosion inhibitors.

Clean-ACT™ ReStorz-It

Clean-ACT™ ReStorz-It is specially formulated to remove stains caused by acid rain, air-borne contaminates, heavy carbon and other stains associated with highly polluted areas. It is a concentrated acidic cleaner for use on most standard unpolished masonry. It is ideally suited for brick, granite, sandstone, slate, terra cotta and many other masonry surfaces.